WAREMA window awnings are exterior textile awnings for windows and glazed openings. Depending on the product, the fabric is guided vertically by rails, cables or zip guidance, or projected outwards by drop arms. Configurations are available for visible, recessed and window-integrated installation. A WAREMA specialist retailer can check dimensions, fixing details, controls and installation requirements.
A window awning combines an exterior fabric with a product-specific box and guide system. It can reduce direct solar radiation at the glazing and support glare control, daylight management and visual privacy. The achievable effect depends on the fabric, colour, openness factor, glazing, orientation, dimensions and control strategy.
A WAREMA specialist retailer can confirm which window awning range and guide system suit the opening, façade construction and intended method of operation.
WAREMA vertical awnings are made to measure for selected window sizes and installation situations. Depending on the model, the fabric is guided by rails or cables, or configured as a markisolette. Product dimensions, guide type and operation are selected for the specific project.
Front-mounted window awnings are installed in front of the window and can be planned as visible or plastered-in solutions, depending on the model and façade construction. Available guidance options include rails, easyZIP guidance, drop arms and markisolette configurations.
Window awning systems are designed for coordinated integration into the façade. Depending on the product, the box and guide components can be incorporated into the building envelope, with rail, easyZIP, drop-arm or markisolette variants available for defined applications.
A top-mounted window awning is fitted to the window before the combined unit is installed in the structural opening. This installation method is intended for coordinated new-build, renovation or window-replacement projects. Compatibility must be checked with the window system and façade design.
Shaft awnings are intended for installation in suitable existing recesses or lintel boxes. Depending on the product, they are available with rail or cable guidance, drop arms, easyZIP guidance or a markisolette configuration. The available space and fixing conditions must be checked before specification.
- Made to measure: Window awnings are manufactured to the specified project dimensions.
- Installation options: Product ranges are available for visible, recessed and window-integrated installation.
- Fabric selection: Colours, designs and openness factors can be selected according to the product and required function.
- Operation: Manual, motorised, radio-controlled and smart-control options are available for compatible configurations.
- Project planning: A specialist retailer checks measurements, fixing conditions, electrical requirements and product limits.
Available window awning accessories include motors, radio controls, solar drives, sensors and product-specific components such as WAREMA SecuKit or VisioNeo fall protection. Compatibility, dimensions, installation and intended use must be checked for each configuration.
A drop arm awning projects the lower edge of the fabric away from the façade while the upper section remains close to the window. This can provide shade while retaining daylight and a partial outward view. Projection angle, dimensions and operation depend on the selected product.
A markisolette combines a vertically guided upper section with a lower section that projects outwards on arms. It provides exterior shading while maintaining a partial view through the lower opening. Fabric, projection and operating options depend on the product configuration.
easyZIP guidance retains the fabric edge within the side guide rails. Available wind-load performance depends on the product, dimensions, installation method, fabric and tested configuration. The specified operating limits and product documentation must be observed.
The price of a made-to-measure window awning depends on dimensions, product range, fabric, guide system, operation, accessories and installation. Use the WAREMA configurator to prepare a configuration and request a project-specific quotation, or contact a local specialised retailer. for measurement, planning and installation advice.
Remove loose dirt from the dry fabric with a soft brush and follow the product-specific cleaning instructions . Use only cleaning methods and agents approved for the relevant awning fabric and mechanical components. Avoid aggressive cleaners, hard brushes and high-pressure equipment unless the product instructions explicitly permit them. Allow damp fabric to dry fully before it remains retracted for an extended period.
Selected WAREMA window awnings with easyZIP guidance may be tested for wind speeds of up to 150 km/h. The permissible operating limit depends on the product, dimensions, installation, fabric and site conditions. The stated wind class, product documentation and operating instructions take precedence.
Vertical awnings
Exterior window awnings
Window awning systems
Top-mounted window awnings
Shaft awnings
New buildings
○
○
○
○
Refurbishments and renovations
○
○
○
○
Replacing windows
○
○
Installation and assembly with the windows
○
Installation in existing shafts on site
○
Visible installation
○
○
○
Invisible installation
○
○
○
○
Screen fabrics are available with different openness factors, including opaque and more open constructions. The selected fabric affects outward visibility, daylight, glare and visual privacy. The result also depends on the lighting conditions inside and outside, so privacy should be assessed for the intended use.
A specialist retailer can compare fabric samples and performance values for the selected window awning.
View product examples at a Sunlight Experience Centres or contact a WAREMA specialist retailer. The retailer can assess the window dimensions, façade construction, fixing points, fabric, guide system, controls and installation requirements before preparing a quotation.
The WAREMA brand stands for high-quality sun shading solutions that adapt flexibly to your life. As a leading European manufacturer, the family-owned company develops individual solutions for windows, patios, balconies and outdoor areas. The portfolio ranges from external venetian blinds and roller shutters to awnings and patio roofs, as well as insect screens and intelligent sun shading control systems. In cooperation with qualified specialist companies, all solutions are carefully planned and professionally installed on site. You benefit from long-lasting quality, reliable service and enhanced comfort – for a harmonious interplay of light, shade and living space, today and in the future.