How to clean an awning depends on the fabric, frame material and type of soiling. For WAREMA awnings use gentle cleaning methods and follow the product-specific care instructions. Remove loose dirt first, rinse off cleaning residues and allow the fabric to dry fully before retracting the awning.
The best way to clean an awning is to work from dry surface dirt to gentle wet cleaning. Regular care can make dirt easier to remove and reduce the need for intensive treatment.
- Remove loose leaves, dust and surface dirt regularly.
- Treat fresh marks before they become firmly embedded.
- Plan a more thorough clean after periods of frequent use.
Cleaning frequency depends on the installation location, weather exposure and type of soiling.
Use these seven steps as general guidance. Follow the care instructions for your specific WAREMA product and fabric.
Extend the awning fully and remove loose, dry dirt with a soft brush. Avoid hard bristles and excessive pressure.
Wet the affected fabric with clean water. Keep motors, control units, sensors and electrical connections dry.
Rinse loosened dirt gently with a garden hose. Do not use a high-pressure cleaner unless the product instructions expressly permit it.
For small marks, test a soft white eraser on an inconspicuous area before treating the stain.
Use a mild cleaning solution and a soft sponge or microfibre cloth. Test the solution on an inconspicuous area and rinse it off thoroughly.
Allow the awning fabric to dry completely while extended before retracting the system.
Only apply a compatible reproofing product if this is recommended for the fabric. Follow the product manufacturer’s application instructions.
Use clean water, a soft brush, a soft sponge or microfibre cloth and a mild cleaning solution that is suitable for the surface. Avoid abrasive brushes, intensive scrubbing, aggressive cleaning agents and washing the fabric in a washing machine. These methods may affect the fabric surface or its finish. Keep motors, sensors, controls and electrical connections dry. If the awning is heavily soiled or damaged, contact a WAREMA specialist retailer.
An awning cleaner must be suitable for the material being treated. For WAREMA awnings use the cleaning agent concentrate for sun shading products is intended for compatible plastic and metal surfaces. Follow the instructions for dilution, application and rinsing. When you clean awning fabric use only a mild product that is suitable for the fabric and test it on an inconspicuous area first. Do not place the fabric in a washing machine.
Visit a Sunlight Experience Centres or contact a local WAREMA specialist retailer. They can assess the installation situation, recommend a suitable bespoke awning, take measurements and prepare a quotation. Professional installation and after-sales service are also available.