SPECIALIST DEALER
SEARCH

Find your
WAREMA specialist dealer

Features

Features

  • 230 V WMS Receiver for sun shading products, lighting (e.g. bulb) and window drives for installation in a UP switch box
  • Simple and cost-efficient retrofitting
  • Product types with the matching logic parameters are stored in the actuator
  • All settings and parameters of the automatic functions are stored directly in the actuator
  • Receives commands/weather data and forwards them (intelligent routing)
  • Reports executed commands back to the WMS Transmitter
  • Compact design means it can be mounted in a flush-mounted box

Product

ProductArticle number
WMS Actuator, UP1002880

Technical data

Operating voltage85 – 265 V AC / 50 – 60 Hz
Output230 V AC / max. 700 VA
Transmission frequency2.4 GHz
Logic behaviourPL / RTL / Light
(suitable for all fabric and slat products,
motorised windows
and for switching light)
Run time up/downadjustable
Degree of protectionIP 20
Safety classII
InstallationFlush-mounted
Dimensions49 x 49 x 32 mm

     
Features

Features

  • 24 V WMS Receiver for sun shading products, lighting and window drives for installation in a UP switch box
  • Simple and cost-efficient retrofitting
  • Product types with the matching logic parameters are stored in the actuator
  • All settings and parameters of the automatic functions are stored directly in the actuator
  • Receives commands/weather data and forwards them (intelligent routing)
  • Reports executed commands back to the WMS Transmitter
  • Compact design means it can be mounted in a flush-mounted box
Note: External power supply unit required

Product

ProductArticle number
WMS Actuator 24 V, UP2020361

Technical data

Operating voltage24 V DC
Output24 V DC / max. 72W
Transmission frequency2.4 GHz
Logic behaviourPL / RTL / Light
(suitable for all fabric and slat products,
motorised windows
and for switching light)
Run time up/downadjustable
Degree of protectionIP 20
Safety classII
InstallationFlush-mounted
Dimensions49 x 49 x 32 mm

     
Features

Features

  • WMS Transmitter for integrating conventional push buttons into the WMS
  • Control of up to 10 receivers of the same product type
  • Converts the key impulses of a conventional 230 V push button into WMS signals for remote control of WMS receivers
  • Connection of an additional push button allows comfort functions of products preprogrammed to recognise each other to be switched on and off or movement to individual comfort positions
  • Compact design enables installation in a flush-mounted box
  • Commissioned via WMS Hand-held transmitter, WMS Central transmitter or comfortably using the WMS studio software

Product

ProductArticle number
WMS Transmitter, UP1002882

Technical data

Operating voltage85 – 265 V AC / 50 – 60 Hz
OutputRadio signal
Transmission frequency2.4 GHz
Channels1
Degree of protectionIP 20
Safety classII
InstallationFlush-mounted
Dimensions49 x 49 x 32 mm

     

Documents & Downloads

Description Valid from
WMS Actuator 11.2017 Send document linkSend document linkSend document link
WMS Application brochure 07.2015 Send document linkSend document linkSend document link
WMS Transmitter 09.2014 Send document linkSend document linkSend document link

Find a qualified
advisor in your area now

  • Individual consultations
  • Comprehensive product selection
  • Inspirations for your project