Efficient
Omnexo actuators control up to six 230 V sun shading drives. The outputs can be programmed freely.
Flexible
Omnexo switch actuators are available for different installation situations: The actuators are available in a compact design for surface mounting and DIN rail mounting in equipment cabinets.
Simple
Straightforward handling: The entire system is designed for especially easy installation, as well as comfortable set-up and operation.
- Control of two 230 V AC sun shading drives
- Required connecting lines:
- 230 V AC connecting line for supplying the actuator and the connected sun shading drives
- 4-wire bus cable
- Connection of conventional push buttons to local individual and group operation (24 V)
- Locking contacts to disable the drive (e.g. when windows are open)
- Operating mode of local push buttons is automatically adjusted to the set product types
- WAREMA's own Simplified-Speedscan procedure transmits serial numbers to the central control unit
Description
Value
Operating voltage
230 V AC
Frequency
50 Hz
Output
2 x 230 V AC
Switching capacity per drive
500 VA with 230 V AC
Degree of protection
IP 30
Safety class
I
Type of installation
Surface-mounted (AP)
Width
158 mm
Height
180 mm
Depth
60 mm