The WAREMA climatronic® actuator 230 V can be used to control up to four 230 V AC sun shading systems or window drives. The actuator supports the control of external venetian blinds with two lower limit switches.

Direct

Controls up to four 230 V AC sun shading or window drives. Supports the control of your external venetian blinds with two lower limit switches.

Ready to use

The system is set up quickly and safely. Suitable parameters are preset at the factory for your different sun shading products and their applications.

Air-conditioned

The actuator controls the sun shading system, lighting and other power consumers – automated by your WAREMA climatronic® control panel according to time of day, weather and position of the sun.

  • Control of up to four 230 V sun shading drives or window drives
  • Control of external venetian blinds with 2 lower limit switches possible
  • Required connecting lines:
    • 230 V for supplying the connected 230 V drives and for supplying the actuator
    • 4-wire bus cable (climabus)
  • Connection of conventional push buttons to local individual and group operation (24 V)
  • Locking contacts to disable the drive (e.g. when windows are open)
  • Allocation of connected sensors when commissioning via control panel or WAREMA climatronic ® studio
  • The operating mode of the connected push buttons is automatically adjusted to the set product types
Article number: 2015600

Description

Value

Operating voltage

230 V AC

Frequency

50 Hz

Output

4 x 230 V AC

Switching capacity per drive

500 VA at 230 V AC

Degree of protection

IP 30

Safety class

I

Type of installation

Surface-mounted (AP)

Width

157 mm

Height

180 mm

Depth

60 mm

Hardware to connect up to 12 drives with 2 separate supplies