Drives for roller shutters
Technologies at a glance

Drives with motorisation

Standard motor

Standard motor

Basic motorisation with electronic limit switch-off, without operating switch


  • Functions perfectly adapted to the roller shutter type concerned
  • Comfortable adjustment of the motor limit positions with programming cable
  • 230 V, 50 Hz

 
EWFS radio motor

EWFS radio motor

  • Based on our unidirectional EWFS radio system with a transmission frequency of 433.92 MHz
  • Comprehensive range of functions, e.g. teachable comfort position
  • Combinable with comprehensive control components such as wall-mounted transmitter, weather station

 
WMS radio motor

WMS radio motor

  • Based on our bidirectional WMS radio system with a transmission frequency of 2.4 GHz
  • Maximum safety by means of an encrypted radio network
  • Accurate moving to intermediate positions
  • Exact position feedback
  • Can also be operated via smartphone using WAREMA WebControl

 

WAREMA SecuKit

Additional belt for roller shutters that are motor-driven as standard. The roller shutter can be reliably and very quickly moved to the upper limit position in the event of a power failure, e.g. due to a fire.


Available for front-mounted and top-mounted roller shutters.

Further information on the WAREMA SecuKit can be found here

Motor with connection for additional crank operation

Motor with connection for additional crank operation

Alternative operation in case a motor or the power fails.


  • Crank not suitable for continuous mode
  • Ratio 27:1

   

WAREMA SecuKit
Sun shading. Security. Perfectly combined.

Roller shutters from WAREMA are true multi-talents. Not only do they provide effective sun shading and visual privacy, but also reliable protection against burglary and noise. An intelligent control system from WAREMA also guarantees extremely comfortable operation. But what happens when there is a power failure? The solution: the new WAREMA SecuKit – the additional belt operation for motor-driven roller shutters! This allows the sun shading product to be raised easily and quickly at all times – independent of the power supply.

Drives for manual operation

Belt

Belt

  • Widths: 14 or 23 mm
  • Colours: grey, brown optional
  • Accessories: belt winder and brush guiding roller in white and/or brown

 
Cord

Cord

  • with cord deflection roller and feedthrough device
  • Diameter: 4.5 mm
  • Colours: black and white, brown optional
  • Accessories: cord winder, white or brown

 
Crank rod

Crank rod

  • Crank rod with collapsible crank; sealed joint plate and square with thermal barrier
  • Material: aluminium; or steel (crank holder with magnet)
  • Crank length (standard): 1200 mm
  • Surface: C0 anodised, optional powder coating in RAL 9016 or C34 anodised

 

These solutions may also interest you

WAREMA control systems

Convenient and comfortable

Optimise your sun shading systems with controls from WAREMA, the leading sun shading system manufacturer. Don't settle for anything less.

Smart Programming Cable

Small device - big effect!

The new programming cable together with the special smartphone app makes the work of our partners noticeably easier. Drive limit positions can be adjusted in no time at all, making bundles of cables and detailed instructions unnecessary.

Find your right specialist dealer in your country.
Competent consulting and expertise in sunshading.