Front-mounted roller shutters
For more aesthetic facades

WAREMA SecuKit

Additional belt for roller shutters that are motor-driven as standard. The roller shutter can be reliably and very quickly moved to the upper limit position in the event of a power failure, e.g. due to a fire.


Available for front-mounted and top-mounted roller shutters.

Further information on the WAREMA SecuKit can be found here

VisioNeo

Light and simplicity are the vital essence of modern architecture. A large number of today's facades feature a look that includes floor-to-ceiling windows. But if occupants are to open this glazing and enjoy the fresh air outside, an effective form of protection that keeps them from falling out the window is a must. With its integrated fall protection VisioNeo, WAREMA now offers an intelligent combined solution to meet this need.

Insect screen and pollen protection

Keep annoying pests like mosquitoes, wasps or even pollen outside. With our innovative integrated insect screen and pollen protection solutions you can relax and breathe easy all the time.

Insect screen for V4/V6

Insect screen for V4/V6

  1. Box
  2. Inspection cover
  3. Guide rails
  4. Roller shutter curtain
  5. End rail: When using an insect screen roller blind, a flat end rail is used.
  6. Insect screen gauze: Highly transparent WAREMA VisionAir gauze made of plastic-coated fibreglass mesh in black
  7. Insect screen handle rail: Extruded aluminium with brush bead for sealing

Printable profiles

Whether for advertisements, logos or creative ideas - there is now more freedom with facade design than ever before. The profiles of the roller shutter curtains can be printed either in part or across the whole surface both inside and out.

Minimax guide rail

Perfect integration into slender building architecture. This slim guide rail for front-mounted roller shutters is only 37 mm wide and, when embedded in plaster, has a visible width of just 22 mm and can be recessed so that the window frame can be insulated from the side.

Solar drive

Use the power of the sun! Thanks to the optional solar drive for roller shutters, sustainable motorisation is also possible - completely without wall openings and line routings.

Projecting arm

This option enables a view outside and the best fresh air supply at all times, and can also be combined with an insect screen roller blind.

Emergency power supply kit

Your safety in the event of a power failure! The emergency power supply kit from WAREMA increases safety fully automatically and consists of a UPS and a special motor control unit.

Security package

The perfect protection for the home. The security package offers additional protection and increased burglar resistance as per DIN 18073.

                   

The WAREMA Colour World for powder-coated aluminium parts

The WAREMA Colour World is available on all powder-coated aluminium parts, such as guide rails, cover panels, profiles and boxes. Choose from the 3 colour categories "Highlight", "Variation" and "Individual". WAREMA offers you over 400 powder colours and up to 5 different surface qualities.

 
Front-mounted roller shutter V4

Front-mounted roller shutter V4

  1. Box: Roll-formed/folded in 4 box sizes | Closed on four sides, max. 3000 mm wide | Side covers made of diecast aluminium | Available as left rolling blind< lf="">/lf>
  2. Inspection cover: Inspection cover roll-formed/folded
  3. Guide rails: Extruded, with plastic bead (optional brush seal)
  4. Roller shutter curtain: Shutter profiles A 36, A 44, A 53 made of aluminium, K 36 and V 36 made of plastic | Colours according to colour chart for WAREMA roller shutter profiles
  5. Triangular design end rail: Extruded; optional flat end rail possible

Front-mounted roller shutter V6

Front-mounted roller shutter V6

  1. Box: Extruded in 5 box sizes | Closed on three sides up to max. 3000 mm wide, closed on four sides up to max. 6000 mm wide | Side covers made of diecast aluminium | Available as left or right rolling blind
  2. Inspection cover: Extruded
  3. Guide rails: Extruded, with plastic bead (optional brush seal), watertight against driving rain
  4. Roller shutter curtain: Shutter profiles A 36, A 44, A 53 made of aluminium, K 36 and V 36 made of plastic | Colours according to colour chart for WAREMA roller shutter profiles
  5. Triangular design end rail: Extruded | Optional flat end rail possible

Front-mounted roller shutter V10

Front-mounted roller shutter V10

  1. Box: Extruded in 4 box sizes | Closed on four sides, with insect screen roller blind up to max. 2000 mm wide, without insect screen roller blind up to max. 6000 mm wide | Side covers made of diecast aluminium | Available as left rolling blind
  2. Inspection cover: Extruded
  3. Guide rails: Extruded, with plastic bead (opt. brush seal)
  4. Roller shutter curtain: A 36 and A 44 made of aluminium, K 36 and V 36 made of plastic (every 5th profile is made of aluminium) | Colours according to colour chart for roller shutter profiles
  5. Triangular design end rail: Extruded
  6. Insect screen gauze: Highly transparent WAREMA VisionAir gauze made of plastic-coated fibreglass mesh in black

Box shapes

V4
Roll-formed/folded in 4 box sizes
Box shapes: rectangular, round, square or can be embedded in plaster
Closed on four sides, max. 3000 mm wide
Side covers made of diecast aluminium
Available as left rolling blind
V6
Extruded in 5 box sizes
Box shapes: rectangular, round, square or can be embedded in plaster
Closed on three sides up to max. 3000 mm wide, closed on four sides up to max. 6000 mm wide
Side covers made of diecast aluminium
Available as left or right rolling blind

V10
Extruded in 4 box sizes
Box shapes: rectangular, round, square or can be embedded in plaster
Closed on four sides, with insect screen roller blind up to max. 2000 mm wide, without insect screen roller blind up to max. 6000 mm wide
Side covers made of diecast aluminium
Available as left rolling blind

Watertight guide rails against driving rain

In order to offer a watertight solution against driving rain for insulated facades, we have optimised our guide rails:
a groove integrated into the profile as standard immediately redirects via the window sill any moisture that may have penetrated the fabric through the capillary effect. Furthermore, a sealing cord can be inserted into the groove for additional sealing.

The rail's watertightness in driving rain was tested by ift Rosenheim. Click here to view the results. The detailed test report is available to download in myWAREMA under Sales documentation in the area Services & Tools.

Standard types available:

  • 55-25 (figure), 55-45, 55-65
  • 55-48, 55-52
  • 37-25, 37-48

Integrated lintel insulation

Box insulation provides energy savings by thermally separating the structure and the box.
This insulation can be optionally provided with external venetian blind cover panels, front-mounted roller shutters and window awnings with ZIP guidance.
The insulation is available in different thicknesses. It is either applied behind and/or above the box as needed.

Insulation:

  • Insulating material: Polyurethane rigid foam (PUR) with aluminium lamination on both sides
  • Thermal conductivity: 0.024 W/(mK)
  • Insulation thicknesses in mm: 15, 20, 30, 40, 50, 60

Profiles

1. Profile made of aluminium (A 36)
2. Profile made of plastic (K 36)

Guide rail with integrated insulation

On this guide rail, the integrated insulation ensures a thermal barrier between the window frame and the guide rail.

An aluminium cover profile powder-coated in the guide rails' colour protects the insulation made of highly compressed EPS foam. The cover profile and insulation are equipped with a groove which allows any intruding water to drain onto the window sill. If necessary, a sealing strip can be placed in this groove.

               
Always the right roller shutter solution

Always the right roller shutter solution

From an energy perspective, a front-mounted roller shutter from WAREMA is always by far the best solution for new buildings, renovations or for later installation. Because a WAREMA front-mounted roller shutter helps you save valuable energy by providing an insulating air pocket in front of glass doors and windows. It also reliably protects against sunlight, the effects of weather, prying eyes and thieves. But that's not all: Thanks to four different box shapes, your front-mounted roller shutter from WAREMA can be optimally adapted to the look of your property. Even a combination with front-mounted external venetian blinds is very simple – thanks to boxes that can be perfectly coordinated with one another. And you also have numerous operating options: from traditional cords or belts to cranks and automatic drives.

Versatile even in terms of accessories

Versatile even in terms of accessories

At WAREMA you are sure to find a front-mounted roller shutter in the style you want. This is made possible by a wide range of available powder-coating colours. Front-mounted roller shutters can also be installed by positioning the shutter box in front of the facade in such a way that no thermal bridges develop. An extensive range of accessories can enhance your front-mounted roller shutter even more: for example, the slender Minimax guide rails, a security package or the optional integrated insect screen. Or you can opt for a front-mounted roller shutter with a solar-powered control system, which can even be operated independently of the mains.

   

Your WAREMA front-mounted roller shutters

Construction limit values
max. width: 3500 mm | max. height: 3500 mm | max. area: 10 m2
Box sizes
12.5 | 14.5 | 16.5 | 18.5 | 20.5
Drives
Cord | Belt | Crank | Motor | Radio motor | Optional solar drive

Front-mounted roller shutters
Ideal for retrofitting

WAREMA front-mounted roller shutters are ideally suited for retrofitting and are often installed during renovation work. They can either be integrated "invisibly" in the facade or used as an optical facade highlight.

These solutions may also interest you

Insect screen solutions

All-round safety

The insect screen solutions from WAREMA make any room an insect-free zone. Efficient, elegant and environmentally friendly.

WAREMA control systems

Convenient and comfortable

Optimise your sun shading systems with controls from WAREMA, the leading manufacturer for sun shading systems. Don't settle for anything less.

Which roller shutter suits you?

Please select your application. Multiple selection possible.

No product is available for this selection.
Please change your selection or contact the specialist dealer in your area.
They will be happy to advise you! Open the WAREMA specialist dealer search.

Einbausituation

Material Rollladenpanzer

Roller shutter curtain colour

more colours available

Comfort-Funktionen

Zubehör

Colours of boxes/guide rails

more

Antrieb

Steuerung (Smart Home) Conveniently control your sun shading system via smartphone, tablet & co.

Bauvorhaben

Find your right specialist dealer in your country.
Competent consulting and expertise in sunshading.