Websites:

Languages:

Roller shutters
For renovations

SPECIALIST DEALER
SEARCH

Renovation roller shutter
Save more energy in future

Energy-efficient	Favourable solution in terms of energy efficiency for reusing existing lintel boxes; fulfils the current EnEV
Simple	Installation of roller shutter on the new window – thus both components are installed in a single step and both the facade and inside plaster remain largely unaffected by the replacement
Suitable	In 2 box sizes and also available with integrated insect screens

Additional technologies
Colours
Details
Test values

Insect screen and pollen protection

Keep annoying pests like mosquitoes, wasps or even pollen outside. With our innovative integrated insect screen and pollen protection solutions you can relax and breathe easy all the time.

More information

Printable profiles

Whether for advertisements, logos or creative ideas - there is now more freedom with facade design than ever before. The profiles of the roller shutter curtains can be printed either in part or across the whole surface both inside and out.

More information

Emergency power supply kit

Your safety in the event of a power failure! The emergency power supply kit from WAREMA increases safety fully automatically and consists of a UPS and a special motor control unit.

More information

The WAREMA Colour World for powder-coated aluminium parts

The WAREMA Colour World is available on all powder-coated aluminium parts, such as guide rails, cover panels, profiles and boxes. Choose from the 3 colour categories "Highlight", "Variation" and "Individual". WAREMA offers you over 400 powder colours and up to 5 different surface qualities.

More information

Installation detail

Box/Insulating shell: Polystyrene, 3-part: upper/lower insulating shell & insulating wedge | With reinforcement profiles and connecting tabs of extruded aluminium
Inspection cover (optional): Closure on the inside consisting of plastic with bonded insulation | Inspection cover strictly necessary to achieve tested heat transmission coefficients
Guide rails: Extruded aluminium, powder-coated according to RAL | Guide rails optionally available with legs
Bottom rail: Flat end rail made of aluminium with round stoppers | Optionally with two-piece 90°-profile end rail
Roller shutter curtain: Shutter profiles made of aluminium or plastic
Insect screen roller blind (optional)

Installation detail with side cover

Side cover: Fibreglass-reinforced polyamide
Roller shutter curtain: Shutter profiles made of aluminium or plastic
Insect screen roller blind (optional): WAREMA VisionAir screen made of plastic-coated fibreglass mesh | Operation by aluminium handle rail | Brush seal ensures reliable sealing below | Smooth raising thanks to soft-raise function

Renovation roller shutter, test values for heat transmission coefficient

The detailed basic conditions for determining the test values are provided in the detailed test reports. Please click the respective value.

**Test values for the heat transmission coefficient**
	Box size 205	Box size 225
Temperature factor fRSi (Target: fRSI ≥ 0.70)	0.74	0.73
Heat values USB in W/(m²K) (Target: ≤ USB 0.85)	0.79	0.74

The values specified above only apply in combination with the inspection cover offered as an accessory.

Your WAREMA renovation roller shutters

	Construction limit values max. width: 3000 mm \| max. height: 2600 mm \| max. area: 7 m²
	Box heights 205 mm \| 225 mm
	Drive Belt \| Crank \| Motor \| Radio motor

Documents & Downloads

Download our catalogues and brochures for free.

Description	Valid from	Forwarding
colour chart external venetian blinds and roller shutters	04.2019	Send document link
Renovation roller shutters data sheet	04.2017	Send document link
Roller shutter technical data EN	04.2019	Send document link

Renovation roller shutter
Practical solution in terms of energy efficiency

The WAREMA renovation roller shutters, RE-RO for short, are a practical solution in terms of energy efficiency for reusing existing lintel boxes. The renovation roller shutter is premounted to the new window. Both components can then be installed in a single step. The facade and inside plaster remain largely unaffected by the replacement.