Individual
Control of WMS sun shading products according to personal requirements
Flexible
Integration of further sun shading products into the WMS network possible
Simple
Commissioning and changes possible
Downloads
WMS studio pro
Software for commissioning and adjusting WMS devices conveniently on the PC
WMS studio pro
The WMS studio pro product instructions are directly integrated into the software
WMS toolkit
Software for setting up WMS packages for patio awnings and for comfortably adjusting WMS radio motors
NOTE: All WMS software solutions can only be used with the WMS Stick, which is required to load the software data onto the devices!
Product
Article number
WMS Stick
1002775
- WMS transceiver for easy commissioning of WMS networks
- WMS networks configured at the PC are transferred to the network participants via radio using a WMS Stick
WMS studio pro
Operating system
Windows 7, Windows 8.0/8.1 and Windows 10
Framework
.Net Framework 4.6.1
Colour quality of the screen
32 bit
Screen resolution
1024 x 768 or higher
Working memory
2 GB
Free hard disk space
2 GB
WMS toolkit
Operating system
Microsoft Windows XP, Windows Vista, Windows 7
Processor speed
2 GHz or higher
Working memory
512 MB RAM
Free hard disk space
256 MB
Screen resolution
1024 x 768 or higher
Downloads
studio software
For comfortable commissioning, changing limit values and settings of scenes on the PC.
WAREMA climatronic® 3.0 studio programming and parameterisation software
WAREMA climatronic® studio software manual
WAREMA climatronic® WebControl
Software for integrating a mobile end device into the WAREMA climatronic® system as a control panel. Operation via app or web browser
WAREMA climatronic® WebControl (Android)
WAREMA climatronic® WebControl (iOS)
WAREMA Picture Generator
studio software
Operating system
Windows 7, Windows 8.0/8.1 and Windows 10
Processor speed
2 GHz or higher
Free hard disk space
1 GB
Screen resolution
1024 x 768 or higher
Working memory
2 GB
Downloads
studio software
For comfortable commissioning, changing limit values and settings of scenes on the PC.
WAREMA climatronic® 3.0 studio programming and parameterisation software
KNX SA app
Product databases
Product database KNX Gateway (from ETS3)
Product database KNX EWFS Receiver
Product database - KNX MSE 6M230
Product database - KNX SA
Product database KNX SA SMI
Product database WAREMA KNX Room Controller
Product database BAline KNXMCM
Product database KNX Actuator 4M230.12 2Down REG
Product database WAREMA KNX Weather station
WAREMA Picture Generator
EWFS Monitor
LonWorks® systems can be set up and administered via software. Power consumers and limit values can be be visualised offline, beyond rooms and function groups. This allows control experts to configure and individualise the room automation system remotely.
Actuator-specific software (Neuron software, resource file, LNS plug-in, Control Edit) is listed at the end of the corresponding product page.
Features
Downloads
VCU-EDIT
- Software for menu creation for LONVCU
- Manufacturer-independent menu creation
- Character set and icon editor
- Icon templates and menu examples available
- Freely selectable character sets
- Simulation of operating and display functions
- Requires Microsoft Windows XP or later
Visualisation of networks
- Visualisation and operation of LonWorks® networks
- Project-specific visualisation
- Display of current weather data and time
- Area and room illustrations (with floor plans)
- Manual operation of sun shading products
- Control of each facade
- Trend logs
- Alarm illustration
CONTROL_Edit
- Creation of configuration files for LonWorks® motor control units
- Wizard for simplified user guidance with comprehensive subsequent adjustment options
- Simulation of planned control behaviour
- Configuration templates can be accessed free of charge with WAREMA system integration
- Loading of configuration files using free device-specific LNS plugins
- Requires Microsoft Windows XP or later
LONMPM 8DI/8DO
LONMSE 4MDCB-A/B/C
LONMSE 2M230I
LONMSE 4MDCR
LONMSE 4M230I
LONMSE 6M230
LONMSE 2MPF
CONTROL-Edit
Features
Downloads
BAline Studio
Update information
Device software
The most recent device software (MCM / MIO) is located in the BAline library. Download the current library. In BAline Studio, you can import the library into your system.
- Graphical PC software for planning and creating the application software for MCM
- Standardised software for the configuration of automation functions and the LonWorks® network interface or KNX network interface
-- Connection of the functional blocks with network variables, universal inputs and outputs of the side-by-side mountable modules
-- Type converter enables drafting of LonWorks®-independent and KNX-independent functions
-- Simulation of LonMark functional blocks (SFPT) or KNX-independent functions
-- Predefined functions are already contained, e.g. for logics, mathematics, annual shading, slat tracking
-- Collection of multiple functions in macros, e.g. for complex room situations
-- Non-volatile parameterisation of automation functions via LonWorks® or KNX (ETS)
Automation function can be configured independently of side-by-side mountable hardware
- Projectable
- Finished projects are forwarded to third parties
- Loading of application software in MCM
- Free of charge
- Requires Microsoft Windows 7, Windows 8, or Windows 10
BAline Studio
BAline MIO Check
BAline KNX link
BAline Studio LON plugin
BAline device plugin
BAline library
BAline Loader Plugin
KNXMCM software
ETS app "KNXMCM BAline Studio Exchange"
With the "KNXMCM BAline Studio Exchange" ETS app, CSV files that were previously generated in BAline Studio can be imported to ETS. These files contain information about names and types of construction projects and the direction of data flow, which were adjusted in BAline Studio projects. With "KNXMCM BAline Studio Exchange" the settings on KNX devices can be easily made so that the corresponding BAline Studio Project can run perfectly on these devices.
Product database BAline KNXMCM
External link to KNX ETS shop
LONMCM
Downloads
Modbus studio
. For convenient computer-based commissioning and changes to parameters and settings of Modbus actuators:
WAREMA Modbus studio – software download
WAREMA Modbus studio – software manual