The WAREMA climatronic® switch actuator 4MDC can be used to control 4 sun shading drives with 24 V DC, independently of each other.

Direct

Controls up to four 24 V sun shading drives.

Protecting

Smooth raising and lowering: with or without speed regulation for your internal sun shading systems and double-glazed facade venetian blinds.

Ready to use

The system is set up quickly and safely. Suitable parameters are preset at the factory for your different sun shading products and their applications.

  • Actuation of up to four 24 V sun shading drives with reverse polarity switching
  • Connection of drives with incremental encoder possible
  • Required connecting lines:
    • 24 V connecting line for supplying the actuator and the connected 24 V drives
    • 4-wire bus cable (climabus)
  • Connection of conventional push buttons to local individual and group operation (24 V)
  • Locking contacts to disable the drive (e.g. when windows are open)
  • Allocation of connected sensors when commissioning via control panel or WAREMA climatronic ® studio
  • Operating mode of local push buttons is automatically adjusted to the set product types
Article number: 1002954

Description

Value

Operating voltage

24 V DC

Output

4 x 24 V DC

Switching capacity per drive

72 W at 24 V DC

Degree of protection

IP 30

Safety class

III

Type of installation

DIN rail-mounted (REG)

Subassembly width

9 MW

Power supply unit for supplying extra low-voltage consumer loads

Power supply unit for supplying extra low-voltage consumer loads