Universally usable
Omnexo floating actuators control up to four floating switching outputs. The outputs can be programmed freely.
Flexible
Omnexo switch actuators are available for different installation situations: The actuators are available in a compact design for surface mounting and DIN rail mounting in electrical cabinets.
Simple
Straightforward handling: The entire system is designed for especially easy installation, comfortable set-up and operation.
- Control of sun shading drives and power consumers (e.g. lighting) via 4 floating switching outputs
- Required connecting lines:
- 230 V connecting line for supplying the connected 230 V sun shading drives/power consumers or 24 V connecting line for supplying the connected 24 V sun shading drives/power consumers (note terminal set)
- REG actuator: 24 V connecting line from external power supply unit for supplying the actuator
- AP actuator: 230 V connecting line for supplying the actuator
- 4-wire bus cable
- Connection of conventional push buttons for local individual and group operation (24 V)
- Locking contacts to disable the drive (e.g. when windows are open)
- The operating mode of the connected local push buttons is automatically adjusted to the set product types
-
WAREMA's own Simplified-Speedscan procedure transmits serial numbers to the central control unit
Description
Value
Operating voltage
230 V AC
Frequency
50 Hz
Output
4 x floating
Switching capacity per drive
500 VA with 230 V AC
Degree of protection
IP 30
Safety class
I
Type of installation
Surface-mounted (AP)
Width
158 mm
Height
180 mm
Depth
60 mm
Power supply unit for supplying extra low-voltage consumer loads
Power supply unit for supplying extra low-voltage consumer loads