Up to four 24 V DC sun shading drives can be controlled separately with the Omnexo 24 V DC actuator.

Efficient

Omnexo actuators control up to four 24 V DC sun shading drive. The outputs can be programmed freely.

Flexible

Omnexo switch actuators are available for different installation situations: The actuators are available in a compact design for surface mounting and DIN rail mounting in electrical cabinets.

Simple

Straightforward handling: The entire system is designed for especially easy and comfortable set-up and operation.

  • Actuation of up to four 24 V sun shading drives with pole changer switching
  • Required connecting lines:
    • 24 V connecting line for supplying the actuator and the connected 24 V drives
    • 4-wire bus cable
  • Connection of conventional push buttons for local individual and group operation (24 V)
  • Locking contacts to disable the drive (e.g. when windows are open)
  • Operating mode of local push buttons is automatically adjusted to the set product types
  • WAREMA's own Simplified-Speedscan procedure transmits serial numbers to the central control unit
Article number: 2062710

Description

Value

Operating voltage

24 V DC

Output

4 x 24 V DC

Switching capacity per drive

60 W at 24 V DC

Degree of protection

IP 20

Safety class

III

Type of installation

DIN rail-mounted (REG)

Subassembly width

6 MW

Power supply unit for supplying extra low-voltage consumer loads

Power supply unit for supplying extra low-voltage consumer loads