The Inside 1 UP motor control unit transmits move commands from central control units and push buttons to sun shading products with 24 V drives. The locking input prevents damage to the sun shading product when the windows are open.

Concealed

The motor control unit is installed flush-mounted. It transmits commands from your central control unit or your local push button to your 24 V sun shading drives.

Logical

Fits the sun shading product: choose between permanent mode and time mode.

Protective

The locking input locks your sun shading product when the window is open. This means you can automatically and reliably protect your sun shading product from damage.

  • Direct control of a 24 V sun shading drive/window drive via a sun shading control system and a local push button.
  • Multiple motor control units can be combined into a group and controlled jointly with one push button.
  • In permanent mode, the MSE enters lock mode immediately after the push button is pressed (for fabric products/roller shutters/windows).
  • Locking input allows the sun shading drive to be locked, e.g. when a window is opened.
  • The operating voltage for the motor control unit must be generated in an external power supply unit.
Article number: 1002671

Description

Value

Operating voltage

24 V DC

Control voltage

24 V DC

Output

24 V DC

Switching capacity per drive

8 A at 24 V DC

Logic behaviour

PL

Degree of protection

IP 20

Safety class

III

Type of installation

Flush-mounted (UP)

Width

48.5 mm

Height

48.5 mm

Depth

20.4 mm

Power supply unit for supplying extra low-voltage consumer loads

Power supply unit for supplying extra low-voltage consumer loads

Power supply unit for supplying extra low-voltage consumer loads

Power supply unit for supplying extra low-voltage consumer loads