The Compact 1 motor control unit with integrated power supply unit transmits move commands from central control units to sun shading products with 230 V drives. The installation is either surface mounted, flush-mounted or in-line. The motor control unit generates the 24 V DC control voltage for control with a push button or the sun shading control system.

Connecting

The motor control unit runs 230 V drives of sun shading products.

Adjustable

Time mode or permanent mode: the logic behaviour of the push button is adjustable.

Practical

The motor control unit generates the 24 V control voltage for control via a push button or the sun shading control system.
  • Directly controls a sun shading drive via the sun shading control system or an on-site push button.
  • Multiple motor control units can be combined into a group and controlled jointly with one push button.
  • The operating mode of the Push button can be switched between time mode and permanent mode.
  • ZL: In time mode, the MSE enters lock mode after the push button is pressed for approx. 2 seconds. Operating the push button briefly generates a tilting impulse (on slat products).
  • PL: In permanent mode, the MSE enters lock mode immediately after the push button is pressed (for fabric products/roller shutters).
  • The sun shading drive can be locked via the locking input when, for example, a window is opened. (AP/REG).
  • MSE Compact 1 PF REG is used for electrical isolation on long control lines and for creating additional groups in control line systems.
 Article number: 2016480

Description

Value

Operating voltage

230 V AC

Output

230 V AC

Switching capacity per drive

500 VA with 230 V AC

cos φ = 0.6

Logic behaviour

ZL PL

Degree of protection

IP 30

Safety class

II

Type of installation

DIN rail-mounted (REG)

Subassembly width

3 MW