The floor distribution control Compact controls motor control units for up to 4 facades or groups via a higher-level central control unit or for facades with operation on different stories. The sun shading system is controlled with time mode.

Completely controlled by level

Control on the channel or the facade with 4 outputs: independent of the sun shading control system, up to 4 facades or grouped motor control units per level can be controlled using a level push button.

Time mode

The operating mode is designed for the control of slat products.

Potential-reinforced

Galvanic isolation for large systems of 200 motor control units or more.
  • Floor operation of up to 4 facades via connectable sunblind push buttons
  • ZL: In time mode, the sun shading product enters lock mode after activation for approx. 2 seconds. Operating the push button for a shorter duration generates a tilting impulse (on slat products)
  • For use as:
    • Potential amplifier (galvanic isolation for large systems of 200 MSEs or more)
    • Group control device for up to 4 groups
  • 4 floating outputs
 Article number: 1002743

Description

Value

Operating voltage

230 V AC

Control voltage

24 V DC

Output

4 x floating

Switching capacity per drive

700 VA with 230 V AC

Logic behaviour

ZL

Run time up/down

3 minutes

Degree of protection

IP 30

Safety class

II

Type of installation

Surface-mounted (AP)

Width

210 mm

Height

180 mm

Depth

60 mm