Emergency power supply kit
Safety in the event of a power failure

Safety
for every sun shading system

The emergency power supply kit is a comfort control system for ensuring that sun shading products are raised in the event of a power supply interruption. It consists of an uninterrupted power supply (UPS) and the motor control unit (MSE emergency power supply kit). In an emergency, the automatic, safe and superordinated raising of up to three connected sun shading products with 230 V drive is guaranteed. Just five minutes after troubleshooting or activating the manual reset, the sun shading system can be operated normally as before.

Uniform running behaviour for all curtains

Up to three drives for each emergency power supply kit

Continuous functional check

WAREMA emergency power supply kit
A safe feeling for sure

The emergency power supply kit from WAREMA is a comfort control system for ensuring that sun shading products are raised in the event of a power supply interruption

Your WAREMA emergency power supply kit

	Field of application & emergency situation Commercial or public buildings Power failure \| fire \| panic situation \| smoke development
	Trigger & opening speed Automatically via building control system or, in the event of a malfunction, manually via emergency push button approx. 27 seconds
	Maintenance At least once a year by qualified specialist

Emergency power supply kit

Features

Emergency power supply kit for automatic raising of curtains in the event of a power failure
The following causes ("alarm signals") can prompt a raising movement:
- Loss of the 230 V AC supply
- Empty, faulty or old storage batteries
- UPS overload
- Internal UPS fault
- Building control system (BCS), e.g. fire alarm system
- Optional Up button

Product

Product	Article number
Uninterrupted power supply for emergency power supply kit MSE	2013984
MSE emergency power supply kit, AP	2014062
MSE emergency power supply kit, REG	2013983
Accessories	Article number
UPS Bracket for wall installation, dimensions 40 x 170 x 180 mm	2023268

Technical data

Technical data for UPS
Operating voltage	230 V AC
Safety class	I
Weight	13.2 kg
Dimensions	158 x 137 x 358 mm
Technical data for the MSE emergency power supply kit
Operating voltage	230 V AC
Output	500 VA
Degree of protection, AP	IP 30
Degree of protection, REG	IP 20
Dimensions	106 x 180 x 60 mm (AP), 6 MW (REG)

Documents & Downloads

Description	Valid from	Forwarding
Emergency power supply kit	02.2019	Send document link
Prüfblatt WAREMA Notstrom-Kit	10.2017	Send document link
Übergabeprotokoll WAREMA Notstrom-Kit	03.2016	Send document link