The WAREMA Modbus actuator 230 V can be used to control up to 6 sun shading drives or power consumers independently of each other. They integrate into an existing network with Modbus protocol and implement commands from a higher-level control.

Integrative

WAREMA Modbus actuators 230 V execute move commands from your superordinate control and control 230 V AC sun shading drives across four or six outputs.

Open

The open Modbus protocol links your devices from different manufacturers. With WAREMA Modbus actuators 230 V, your sun shading products can be integrated into your existing system so you can centrally control the functions of various devices.

Simple

Connection is straightforward. The actuator has inputs for standard push buttons. The operating mode is automatically adapted to your connected sun shading products.

  • Control of six 230 V sun shading drives or twelve 230 V power consumers (e.g. lighting)

  • Required connecting lines:

    • 230 V connecting line for supplying the actuator and the connected sun shading drives/power consumers

    • 4-wire bus cable (Modbus)

  • Connection of conventional push buttons to local individual or group operation

  • Locking contacts to disable the drive (e.g. when windows are open)

  • The operating mode of the connected local push buttons is automatically adjusted to the set product types.

Article number: 2030959

Description

Value

Operating voltage

230 V AC

Frequency

50 Hz

Output

6 x 230 V AC

Switching capacity per drive

500 VA at 230 V AC

Degree of protection

IP 30

Safety class

I

Type of installation

Surface-mounted (AP)

Width

210 mm

Height

180 mm

Depth

60 mm