The Modbus communication standard uses the client server methodology. Thanks to their open, manufacturer-independent protocol as well as their easy integration into existing on-site systems, WAREMA Modbus actuators are a convincing choice. Components are actuated with Modbus commands from a higher-level control system. WAREMA Modbus actuators are the most cost-efficient solution when it comes to building automation for the control of sun shading systems.
- Open protocol allows for the use of components and devices from different manufacturers
- Central management of connected devices
- WAREMA Modbus actuators enable sun shading products to be integrated into the building's systems
- With the Modbus studio commissioning tool, WAREMA Modbus actuators can be assigned Modbus addresses and can be parameterised and loaded.
- Cost-effective building automation solution for sun shading controls in the building's systems
- Communication based on client server architecture enabling the specific control of one or more products at the same time
- Data transmission takes place via serial line
Move commands in a Modbus system are transmitted via the bus line. Every actuator filters the intended signals from an upstream control and independently initiates the commands for all connected products (sun shading system, light, windows, etc.).
Modbus actuator for switching 230 V sun shading drives or power consumers
Modbus actuator for central and local operation of 24 V sun shading drives with pole changer switching
Modbus Softwaretools for commissioning, extension and diagnosis