WAREMA bus systems coordinate sun shading products and other systems such as lighting, air conditioning and heating. Data exchange takes place over standardised protocols and enables products from different manufacturers to be used in one system. For this purpose, each actuator extracts commands intended for them and controls power consumers.

Continuous

Flexible networking of complex building structures: Links any number of products and trades for sun shading, lighting and air conditioning.

Universal

LonWorks® system connects numerous power consumers from different function groups to form one decentralised building automation network. WAREMA LonWorks® solutions integrate the sun shading system, lighting and window control into the LON® network.

Comfortable

User comfort and energy requirements in harmony: the slat tracking based on the position of the sun including Cut-off limitation and annual shading support the daylight utilisation and heating or cooling requirements as needed.
  • Connectable power consumers
    • 6 x 230 V AC sun shading drives in 4 groups or
    • 4 x 230 V AC sun shading drives and 4 x 230 V AC lamps
    • 4 conventional sunblind push buttons
    • 4 conventional light push buttons, window contacts
  • Functionality for each Controller in the control software (excerpt):
    • Annual shading to accommodate shadows cast by surrounding buildings or similar
    • 4 switchable slat tracking systems
    • Automatic control of the slat angle depending on the elevation and azimuth angle of the sun for daylight utilisation
    • Time switch for move commands and automatic controls
    • Manual operation
    • Heating and cooling support that accounts for presence
    • Parameterisable functionality with Control Edit
    • Central control
    • Scenarios, e.g. for simple recall of complex room situations
  • Replaceable miniature fuses for line protection
  • Surface-mounted housing model for economical distributed installation, incl. strain relief
 Article number: 1002611

Description

Value

Operating voltage

230 V AC

Connection type

Plug terminal

Output

6 x 230 V AC

Switching capacity per drive

500 VA with 230 V AC / cos φ = 0.6

Total power light

2 kW with 230 V AC

500 W per output

1.5 kVA, 162 μF (fluorescent lamps)

Input digital

4 x sunblind push buttons

4 x binary inputs

Degree of protection

IP 30

Safety class

I

Type of installation

DIN rail-mounted (REG)

Subassembly width

12 MW