The KNX actuator SA SMI can be used to control up to 16 SMI or SMI LoVo sun shading drives in a maximum of 16 groups, independently of each other.

Adjustable

With the WAREMA KNX actuators SA SMI you can individually control up to 16 SMI sun shading drives in up to 16 groups and prevent consumption of a standby current. Appropriate parameters are already pre-programmed and make setup easier for you.

User-oriented

During dwell time, your sun shading system remains in the position that you have set. The settings are not overridden by a control mode.

Straightforward

Easy commissioning of KNX Sun shading actuators thanks to the unique manual override operation via Bluetooth LE.

  • SMI certified according to standard 3.0
  • Individual control and parameterisation of up to 16 SMI drives in up to 16 groups
  • Extensive status objects
  • Limitation of manual operation (e.g. cut-off limitation)
  • Preselection of output type for various sun shading products with preset basic parameters
  • Top positioning precision thanks to extensive settings options for motor properties
  • Support with commissioning on ETS DCA app and KNX actuators app for smartphone (Bluetooth)
  • SMI drives can be switched off via integrated relay, prevents long-term standby current consumption
  • Emergency/manual operation using push buttons
Article number: 2022211

Description

Value

Operating voltage

230 V AC

Power consumption

5 mA

Connection type

Plug terminal

Switching capacity per drive

3600 VA

(Not fused, 16 drives)

SMI interface

Up to 16 x 230 V AC SMI drives

Degree of protection

IP 30

Safety class

I

Radio interface

Bluetooth LE

Type of installation

DIN rail-mounted (REG)

Subassembly width

3 MW