The 230 V KNX secure actuators can be used to control up to eight sun shading drives with 230 V AC, independently of one another. KNX actuators of the secure series conform to the "KNX Secure Standard". This means that access is only possible for authorised participants.

Adjustable

Flexible use: 230 V WAREMA KNX secure actuators control 230 V AC sun shading drives and power consumers individually across 2, 4, 6 or 8 outputs. Appropriate parameters are already pre-programmed and make setup easier.

Protected

Maximum security in the digital building: KNX secure encryption ensures that access is only possible for authorised participants.

Straightforward

Easy commissioning of KNX secure actuators thanks to unique manual operation via Bluetooth LE. The KNX secure pro version is equipped with automatic run time detection and an intelligent update function.

  • KNX secure certified
  • Individual control and parameterisation of 4 output channels
  • Reversible miniature fuse for line protection
  • Minimum pause between switch processes of all actuator relays to avoid current peaks (can be activated)
  • Reversion of rotation programmable via ETS
  • Up to 16 integrated binary inputs (e.g. switching, dimming, blinds, scene buttons, free status/edge evaluation)
  • Extensive status objects for current position, movement status, reaching of limit positions and internal status (alarms, control mode, manual), also as text object
  • Freely usable logic and timer functions with up to four input objects each and own release object
  • Time window for combination of slat position and blind height
  • Preselection of output type for various sun shading products with preset basic parameters
  • Special settings for awnings with ZIP guidance with responsive obstacle detection
  • 3 global safety objects of different priorities with cyclical monitoring and an additional safety object per output
  • Individual allocation of the reaction to safety objects during or after alarm
  • Blind runtime and slat angle are adjustable
  • Separate byte objects for manual and automatic input at position height and slat position
  • Activation/deactivation of the automatic inputs with parameterisable automatic return function
  • Reduction of manual operation possible with automatic objects (e.g. Cut-Off function)
  • 8 freely parameterisable scenes per output
  • Precise positioning through extensive parameterisability of motor properties, such as creep speed, pause times, delay times and correction times for starting/braking
  • Reaction to bus or mains voltage failure and after bus or mains voltage failure can be adjusted
  • Firmware update possible via KNX or USB for future function and safety updates
  • Smartphone app functions via Bluetooth interface
    • Emergency/manual operation
    • Press the KNX programming button
    • Status display of binary inputs
    • Bluetooth code can be changed via ETS
    • Bluetooth code can be deactivated via ETS
Article number: 2040768

Description

Value

Operating voltage

230 V AC

Connection type

Plug terminal

Output

4 x 230 V AC

Switching capacity per drive

500 VA with 230 V AC cos φ = 0.6

Input digital

8 x binary inputs

Degree of protection

IP 30

Safety class

I

Radio interface

Bluetooth LE

Type of installation

DIN rail-mounted (REG)

Subassembly width

9 MW