Search Close
Awnings
Venetian
Rollers
Slat
Roller
Insect
Sun
Controls
Solutions
Service

KNX Sun shading actuators 230/100 V AC
Smart solutions for your WAREMA products

Features

  • KNX sun shading actuator for switching 230 V AC sun shading drives (with binary inputs in the surface-mounted model)
  • 2/4/6/8 output channels, individually parameterised and controlled
  • Preselection of output for internal/external venetian blind, roller shutter/textile sun shading system or window awning with ZIP guidance with preset basic parameters
  • Reversion of rotation programmable via ETS
  • Minimum pause between switch processes of all relays of actuator can be activated
  • Shared L connection
  • Reversible miniature fuse for line protection
  • Voltage input terminal as screw terminals, all other terminals: spring terminals
  • 3 global safety objects of different priorities with cyclical monitoring, one more safety object per output
  • Allocation and adjustable reaction to safety objects during or after alarm
  • Activation or deactivation of the automatic inputs (e.g. sun control, slat tracking) with parameterisable automatic return function
  • Control mode – Connection: separation from manual and automatic input at certain curtain heights and slat positions (byte objects)
  • Option of limiting manual operation with the automatic objects (Cut-Off, etc.)
  • 8 scene objects per output
  • Status of curtain height, slat angle, dwell time active and status of upper limit position
  • Crawling speed when motor starts up can be parameterised
  • in the surface-mounted model:
    • Emergency/manual operation via Bluetooth and smartphone app (can be deactivated)
    • Pressing the KNX programming button via Bluetooth and smartphone app
    • Bluetooth can be deactivated with ETS
    • Bluetooth code changeable
    • Standard (venetian blind) push buttons can be connected via 2/4/6/8 integrated binary inputs (freely available on bus)
  • in the DIN rail-mounted model:
    • Emergency/manual operation using push buttons with integrated LEDs

Product & accessories

ProductArticle number
KNX SA 2M230 REG
2014568
KNX SA 2M230.4 AP
2014569
KNX SA 4M230 REG
2014570
KNX SA 4M230.8 AP
2014571
KNX SA 6M230 REG
2014574
KNX SA 6M230.12 AP
2014575
KNX SA 8M230 REG
2014576
KNX SA 8M230.16 AP
2014577
AccessoriesArticle number
Strain relief kit for surface-mounted housing1002236

Technical data

Operating voltage230 V AC
Degree of protectionIP 30 (AP)
IP 30 (REG)
Safety classI
Type of installationSurface-mounted (AP)
Rail-mounted (REG)
DimensionsKNX SA 2M230/2M230.4:
4 MW (REG)
106 x 180 x 60 mm (AP)

KNX SA 4M230/4M230.8:
4 MW (REG)
158 x 180 x 60 mm (AP)

KNX SA 6M230/6M230.12:
6 MW (REG)
210 x 180 x 60 mm (AP)

KNX SA 8M230/8M230.16:
6 MW (REG)
210 x 180 x 60 mm (AP)
Outputs
Switching capacity per drive500 VA with 230 V AC / cos φ = 0.6
Inputs (in the surface-mounted model)
Max. length of connecting line200 m
KNX interface
TransformerTP 1
Connection typePlug-in terminals

     
Features

Features

  • KNX flush-mounted actuator with floating multifunction output for one sun shading drive or two switchable power consumers for installation in the switch box.
  • Individually parameterise and control output channel.
  • 5 safety objects of different priority with cyclical monitoring
  • Allocation and adjustable reaction to safety objects during or after alarm
  • Activation or deactivation of the automatic inputs (e.g. sun control, slat tracking) with parameterisable automatic return function
  • Control mode – Connection: separation from manual and automatic input at certain curtain height and slat position
  • Manual operation can be limited with the automatic objects
  • 16 scene objects per output
  • Status of blind height, slat angle, drive moving, manual/automatic

Product & accessories

ProductArticle number
KNX Actuator 1MPF.4 UP
2031050

Technical data

Degree of protectionIP 20
Type of installationFlush-mounted (UP)
Dimensions52 × 52 × 24 mm
Outputs
Switching capacity per drivemaximum 5 A, 230 V AC/30 V DC
Inputs
Max. length of connecting line10 m

     

Features

  • KNX sun shading actuator for switching 100 V AC sun shading drives (with binary inputs in the surface-mounted model)
  • 2/4/6/8 output channels, individually parameterised and controlled
  • Preselection of output for internal/external venetian blind, roller shutter/textile sun shading system or window awning with ZIP guidance with preset basic parameters
  • Reversion of rotation programmable via ETS
  • Minimum pause between switch processes of all relays of actuator can be activated
  • Shared L connection
  • Reversible miniature fuse for line protection
  • Voltage input terminal as screw terminals, all other terminals: spring terminals
  • 3 global safety objects of different priorities with cyclical monitoring, one more safety object per output
  • Allocation and adjustable reaction to safety objects during or after alarm
  • Activation or deactivation of the automatic inputs (e.g. sun control, slat tracking) with parameterisable automatic return function
  • Control mode – Connection: separation from manual and automatic input at certain curtain heights and slat positions (byte objects)
  • Option of limiting manual operation with the automatic objects (Cut-Off, etc.)
  • 8 scene objects per output
  • Status of curtain height, slat angle, dwell time active and status of upper limit position
  • Crawling speed when motor starts up can be parameterised
  • AP actuators:
    • Emergency/manual operation via Bluetooth and smartphone app (can be deactivated)
    • Pressing the KNX programming button via Bluetooth and smartphone app
    • Bluetooth can be deactivated with ETS
    • Bluetooth code changeable
    • Standard (venetian blind) push buttons can be connected via 2/4/6/8 integrated binary inputs (freely available on bus)

Products & accessories

ProductArticle number
KNX SA 2M100.4 AP2019180
KNX SA 4M100.8 AP2019181
KNX SA 6M100.12 AP2019182
AccessoriesArticle number
Strain relief kit for surface-mounted housing1002236

Technical data

Operating voltage100 V AC
Degree of protectionIP 30
Safety classI
Type of installationSurface-mounted (AP)
DimensionsKNX SA 2M100.4 AP:
106 x 180 x 60 mm

KNX SA 4M100.8 AP:
158 x 180 x 60 mm

KNX SA 6M100.12 AP:
210 x 180 x 60 mm
Outputs
Switching capacity per drive200 VA with 100 V AC cos φ = 0.6
Inputs
Max. length of connecting line200 m
KNX interface
TransformerTP 1
Connection typePlug-in terminals

     

Features

  • KNX actuator for central and local operation of up to four independently working 230 V AC sun protection drives with 3 limit switches (external venetian blind with 2 low limit switches)
  • Keypad with 4 pairs of buttons and status LEDs
  • 12 binary inputs for use as manual or bus buttons
  • Position feedback of the driving position
  • Position memory (travel position) via 1-bit object (storage and retrieval e.g. via button)
  • Scene control for driving position with 16 scenes per drive
  • Security objects of different priority with cyclical monitoring
  • Enabling or disabling of the automatic inputs (e.g. sun automatic, slat adjustment) with parameterizable automatic return function

Product

ProductArticle number
WAREMA KNX Actuator 4M230.12 2Down REG
2029566

Technical data

Operating voltage230 V AC
Degree of protectionIP 20
Type of installationDIN rail-mounted (REG)
Dimensions6 MW (REG)
Outputs
4 x drives with 2 bottom lower limit switches (UP/DOWN1/DOWN2/N/PE), in total max. 10 A and max. 4 A per output
Inputs
Max. length of connecting line50 m
KNX interface
TransformerTP 1
Connection typePlug-in terminals