BAline
Room automation

Features

  • The BAline LONMSE 16M230 SMI consists of a LONMCM basic module and an extension module with SMI interface, combined in one device.
  • An SMI Interface for up to 16 individually controllable 230 V AC SMI sun shading drives or with 6.3 AT H fuse protection for 6 individually controllable 230 V AC SMI sun shading drives
  • Actuator releases the SMI voltage so that the standby current consumption is kept low
  • Can be connected to the LONMSE 16M230 16I depending on the programming
    • Up to 8 sunblind push buttons or
    • up to 16 signal inputs (e.g. window contacts)
    • Processing signal inputs and sunblind push buttons directly for any motor and via network
  • To create, test and load the system-related control software, use the BAline Studio PC software
  • Surface-mounted housing model for economical distributed installation, incl. strain relief

Technical data

Operating voltagetypically 230 V AC
Degree of protectionIP 30
Safety classII
OutputSMI Interface for up to 16 A
Total max. 3500 VA or 1300 VA
with internal protection 6.3 AT H
Inputs
local voltage, activemin. 8 V DC
typ. 24 V DC
max. 36 V DC
local voltage, inactivemin. –0.5 V DC
typ. 0 V DC
max. 3 V DC
LON interface

TransformerTP/FT-10
Connection typePlug-in terminals
Installation
Type of installationSurface-mounted (AP)
Rail-mounted (REG)
DimensionsLONMSE 16M230 SMI:
106 x 180 x 60 mm (AP)
6 TE (REG)
LONMSE 16M230 SMI 16I:
158 x 180 x 60 mm (AP)
9 TE (REG)

Product

ProductArticle number
BAline LONMSE 16M230 SMI AP
2012369
BAline LONMSE 16M230 SMI REG
2012368
BAline LONMSE 16M230 SMI 16l AP
2012381
BAline LONMSE 16M230 SMI 16l REG
2012380
Optional accessories
Strain relief kit for AP housing
1002236
SMI distribution board, REG
2011710

     

Documents & Downloads

Description Valid from Forwarding
BAline LONMSE 16M230 SMI REG/AP 05.2018 Send document linkSend document link

Your direct contact to us

General enquiries
WAREMA Renkhoff SE

WAREMA Renkhoff SE

+49 9391 20-0

info@warema.de

* Necessary data to make contact.
I hereby consent to WAREMA saving my contact details