SPECIALIST DEALER
SEARCH

Find your
WAREMA specialist dealer

Indirect room lighting through light guidance systems

Indirect room lighting through light guidance systems

Light guidance systems from WAREMA allow you to easily create lighting effects in your home with the sun's light. To do so, simply guide the daylight wherever you want it. And enjoy a glare-free feel-good atmosphere thanks to indirect lighting of your own home. For example by reflecting natural light onto a room's ceiling using our light guidance systems and illuminating it evenly in this way.

Our control systems and the WAREMA insect screen are an ideal supplement to the WAREMA light guidance systems. Both guarantee you additional comfort and quality of life. Our high-grade light guidance systems are individually made for you. You can therefore rely on suitable solutions for your rooms.

 
Internal daylight guiding venetian blinds

Internal daylight guiding venetian blinds

  1. Top rail: Made of extruded aluminium profile, without surface treatment | With additional acoustic profile for noise-reduced top rail | Cover panel optional, powder-coated, in various shapes
  2. Slats: Concave upper side, glossy | Widths of 50, 60 and 80 mm - available with one half perforated
  3. Lateral guidance: Available with cable or rail guidance, or without a guide | Cable guidance by polyamide-sheathed steel wire cord | Rail guidance only possible with size 60 and 80 slats – only the bottom rail is guided
  4. Bottom rail: Made of extruded aluminium, powder-coated

Daylight transport element

Daylight transport element

How can a sufficient amount of light be transported into the room without causing glare? The solution is to install a blind that can be divided into a top and bottom section, where the lower slats are closed while the upper slats remain positioned at a horizontal angle.
Ideal for the workplace or conference room - but also for the living room at home.

Vertical louvre blinds with daylight utilisation

Vertical louvre blinds with daylight utilisation

Glare-free illumination of workstations and protection against prying eyes – vertical louvre blinds with daylight utilisation make it possible.

  1. Transparent section of slat
  2. Dimming section of slat
  3. Top rail
  4. Operation
  5. Weighting plates with distance chains
  6. Runner
  7. Slat holder

     
Slat colours specifically for the daylight guiding venetian blind

Slat colours specifically for the daylight guiding venetian blind

  • Super white: Similar to RAL 9016 with higher reflectance
  • Mill finish: Brushed stainless steel appearance
  • RAL 9016: Traffic white

These colours are highly reflective. The underside of the slats is powder-coated in matt RAL 7030 to prevent glare.

A better view with perforated slats

A better view with perforated slats

These special slats for the daylight guiding venetian blinds are perforated on the room side. The blind therefore appears transparent when closed.

This avoids glare without blocking the view to the outside.

Genius slat

Genius slat

Together with the Fraunhoferinstitut, WAREMA has developed the Genius slat.
For this special slat the benefits of our classic slats have been further optimised:
Heat protection: The new slat profile ensures high reflection of the direct sunlight, even when the slat is opened wide. The matt white finish on the upper slat surface was developed especially for these slats and likewise achieves very high reflectance.
Daylight utilisation and view out: The slats can be kept at a large opening angle over long periods of the day.
Glare control: The underside of the slats is coated with a low-glare light grey finish that directs incident sunlight into the room with a neutral tone.
Genius daylight guiding venetian blinds can be installed in a freely-suspended manner, or with rail or cable guidance.

     

Workplace ordinance

The regulation on computer workstations has been in the workplace ordinance since December 2016.

Here the minimum requirements for health and safety in the workplace at computer monitors is regulated - including for sun shading and glare control systems:

Computer workstations must be set up in such a way that luminous or illuminated surfaces do not cause glare and that reflections on the computer screen are prevented as far as possible. In addition, ambient lighting should be as uniform as possible, should not be too bright, and should rely as little as possible on artificial lighting

Individuality

WAREMA light guidance systems are made to measure. That means you get the right solution for your rooms.

Made in Germany

Developed and manufactured in Germany – so that you can enjoy the highest quality of materials and perfect functionality.

Experience

Since we have implemented widely differing projects around the world, we know what matters – and will offer you individual advice to suit your spatial requirements.

Energy efficiency

Clever solutions from WAREMA save energy and as a result costs – for example by using the daylight.

Application examples

 
     

    These products may also interest you

    WAREMA control systems

    Convenient and comfortable

    Optimise your sun shading systems with controls from WAREMA, the leading sun shading system manufacturer. Don't settle for anything less.

    WAREMA insect screen

    Ideal for large areas

    Insect screen as sash frame. Easy and quick installation directly with your sun shading system.

    Find a qualified
    advisor in your area now

    • Individual consultations
    • Comprehensive product selection
    • Inspirations for your project