SPECIALIST DEALER
SEARCH

Find your
WAREMA specialist dealer

Features

  • Actuator for central and local operation of drives in the WAREMA climatronic® system
  • Up to 4 or 6 sun shading drives or up to 8 or 12 230 V AC power consumers (e.g. lighting)
  • Connected power consumers can be allocated to the 64 available channels either individually or at random
  • Switch actuator supplied with 24 V DC power via an integrated power supply unit
  • A 230 V connecting line to the device and a 4-wire bus connection to the WAREMA climatronic® system are required
  • Connection of conventional push buttons to local individual and group operation
  • On-site window contacts (Reed contacts) can be connected to the actuators so that individual motors can be locked, e.g. when the balcony door is open
  • Operating mode of connected local push buttons is automatically adjusted to the product set for the channel
  • Typical field of application:
    • For distribution over several storeys and sections in construction projects with a larger number of actuators
    • Projects where the same application is frequently repeated

Product & accessories

ProductArticle number
WAREMA climatronic® switch actuator 4M230, AP
1002702
WAREMA climatronic® switch actuator 4M230, REG
1002701
WAREMA climatronic® switch actuator 6M230, AP
1002700
WAREMA climatronic® switch actuator 6M230, REG
1002699
AccessoriesArticle number
Strain relief kit for AP housing1002236

Technical data

Operating voltage230 V AC / 50 Hz
Actuationclimabus
Output4 or 6 (motors) x 230 V AC, 500 VA non-floating
Degree of protectionIP 30
Safety classI
InstallationSurface-mounted (AP)
Rail-mounted (REG)
DimensionsSwitch actuator 4M230
158 x 180 x 60 mm (AP)
9 MW (REG)
Switch actuator 6M230
210 x 180 x 60 mm (AP)
12 MW (REG)

     

Features

  • Floating actuator for central and local operation of drives and switchable power consumers in the WAREMA climatronic® system
  • Up to 4 or 6 sun shading drives or up to 8 or 12 230 V AC power consumers (e.g. lighting)
  • Connected power consumers can be allocated to the 64 available channels either individually or at random
  • A 230 V connecting line to the device and a 4-wire bus connection to the WAREMA climatronic® system are required
  • Power consumers (e.g. lighting) are controlled by WAREMA climatronic® via bus system
  • Connection of conventional push buttons to local individual and group operation
  • On-site window contacts (Reed contacts) can be connected to the actuators so that individual motors can be locked, e.g. when the balcony door is open
  • Operating mode of connected local push buttons is automatically adjusted to the product set for the channel
  • Typical field of application:
    • Smaller construction projects with a low number of actuators (e.g. indoor living areas, conservatories)
    • Special circuits (e.g. control of several different ventilator drives)
    • Switching of various different circuits via one actuator

Product & accessories

ProductArticle number
WAREMA climatronic® switch actuator 4M, AP
1002703
WAREMA climatronic® switch actuator 4M, REG
1002655
WAREMA climatronic® switch actuator 6M, AP
1002704
WAREMA climatronic® switch actuator 6M, REG
1002652
AccessoriesArticle number
Strain relief kit for AP housing1002236
Switching power supply 24 V DC / 2.5 A, AP1002648
Switching power supply 24 V DC / 2.5 A, REG1002647

Technical data

Operating voltage24 V DC
Actuationclimabus
Output4 or 6 (motors) x 230 V AC, 500 VA floating
Degree of protectionIP 30
Safety classI
InstallationSurface-mounted (AP)
Rail-mounted (REG)
DimensionsSwitch actuator 4M:
158 x 180 x 60 mm (AP)
9 MW (REG)
Switch actuator 6M:
210 x 180 x 60 mm (AP)
12 MW (REG)

     

Features

  • Actuator for central and local operation of up to four independently operated 24 V DC sun shading drives
  • Up to four 24 V DC sun shading drives with pole changer switching
  • Connection of incremental encoder motors is possible
  • replaceable miniature fuse for protection of the connected products and flexible motor lines (one miniature fuse for every 2 drives)
  • Connected power consumers can be allocated to the 64 available channels either individually or at random
  • A 24 V connecting line to the device and a 4-wire bus connection to the WAREMA climatronic® system are required
  • Drives are controlled by the WAREMA climatronic® via the bus system
  • Connection of conventional push buttons to local individual and group operation
  • On-site window contacts (Reed contacts) can be connected to the actuators so that individual motors can be locked, e.g. when the balcony door is open

Product & accessories

ProductArticle number
WAREMA climatronic® switch actuator 4MDC, AP
1002955
WAREMA climatronic® switch actuator 4MDC, REG
1002954
AccessoriesArticle number
Strain relief kit for AP housing1002236
Switching power supply 24 V DC / 2.5 A, AP1002648
Switching power supply 24 V DC / 2.5 A, REG1002647

Technical data

Operating voltage24 V DC
Actuationclimabus
OutputSwitching capacity per drive 72 W
Degree of protectionIP 30
Safety classIII
InstallationSurface-mounted (AP)
Rail-mounted (REG)
Dimensions158 x 180 x 60 mm (AP)
9 MW (REG)

     

Features

  • Actuator for central and local operation of up to 16 x 230 V AC SMI sun shading products
  • Control of up to 16 x 230 V SMI motors in up to 8 groups
  • Integrated addressing of SMI motors
  • Actuator releases the SMI voltage so that the standby current consumption is kept low
  • Replaceable miniature fuse for protection of the connected products and flexible motor lines (max. 6.3 A) or without a fuse with separate supply for motors and control system
  • Connected power consumers can be allocated to the 64 available channels either individually or at random
  • A 230 V connecting line to the device and a 4-wire bus connection to the WAREMA climatronic® system are required
  • Eight SMI channels are available
  • Drives are controlled by the WAREMA climatronic® via the bus system
  • Connection of conventional push buttons to local individual and group operation
  • On-site window contacts (Reed contacts) can be connected to the actuators so that individual motors can be locked, e.g. when the balcony door is open

Products & accessories

ProductArticle number
Strain relief kit for AP housing,
1002236
SMI distributor, AP
2011711
SMI distributor, REG
2011710

Technical data

Operating voltage230 V AC / 50 Hz
Actuationclimabus
OutputSMI - interface (for up to 16 x 230 V AC motors)
Degree of protectionIP 30
Safety classI
InstallationSurface-mounted (AP)
DIN rail-mounted (REG)
Dimensions158 x 180 x 60 mm (AP)
9 MW (REG)

     

Features

  • Actuator for the central and local operation of up to four independent 230 V AC sun shading drives with integrated undercurrent detection per motor output or motor-driven windows
  • Control of external venetian blinds with WAREMA vivamatic® - positioning of the slats at the optimal angle before the external venetian blinds are lowered
  • Undercurrent detection per motor output for position identification, position feedback and drive monitoring
  • replaceable miniature fuse for protection of the connected products and flexible motor lines (one miniature fuse for every 2 drives)
  • Connected power consumers can be allocated to the 64 available channels either individually or at random
  • A 230 V connecting line to the device and a 4-wire bus connection to the WAREMA climatronic® system are required
  • Drives are controlled by the WAREMA climatronic® via the bus system
  • Connection of conventional sunblind push button for local individual and group operation
  • On-site window contacts (Reed contacts) can be connected to the actuators so that individual motors can be locked, e.g. when the balcony door is open (max. 8 pieces)

Product & accessories

ProductArticle number
WAREMA climatronic® switch actuator 4M230I (vivamatic®), AP
2013963
WAREMA climatronic® switch actuator 4M230I (vivamatic®), REG
2013962
AccessoriesArticle number
Strain relief kit for AP housing1002236

Technical data

Operating voltage230 V AC / 50 Hz
Actuationclimabus
Output4 x 230 V AC with undercurrent detection, 500 VA non-floating
Degree of protectionIP 30
Safety classI
InstallationSurface-mounted (AP)
Rail-mounted (REG)
Dimensions210 x 180 x 60 mm (AP)
12 MW (REG)

     

Features

  • Actuator for central and local operation of up to four independently operated 24 V AC sun shading drives with 2 lower limit switches or motor-driven windows
  • Switch actuator for controlling external venetian blinds with 2 lower limit switches
  • replaceable miniature fuse for protection of the connected products and flexible motor lines (one miniature fuse for every 2 drives)
  • Connected power consumers can be allocated to the 64 available channels either individually or at random
  • A 230 V connecting line to the device and a 4-wire bus connection to the WAREMA climatronic® system are required
  • Drives are controlled by the WAREMA climatronic® via the bus system
  • Connection of conventional sunblind push button for local individual and group operation

Product & accessories

ProductArticle number
WAREMA climatronic® switch actuator 4M230 LS2 Low, AP
2015600
WAREMA climatronic® switch actuator 4M230 LS2 Low, REG
2015579
AccessoriesArticle number
Strain relief kit for AP housing1002236

Technical data

Operating voltage230 V AC / 50 Hz
Actuationclimabus
Output4 x 230 V AC, 500 VA non-floating
Degree of protectionIP 30
Safety classI
InstallationSurface-mounted (AP)
Rail-mounted (REG)
Dimensions157 x 180 x 60 mm (AP)
9 MW (REG)

     

Find a qualified
advisor in your area now

  • Individual consultations
  • Comprehensive product selection
  • Inspirations for your project