climatronic® Sensor/Tableau Interface
Smart solutions for your WAREMA products

SPECIALIST DEALER
SEARCH

Find your
WAREMA specialist dealer

Features

  • Sensor Interface for integrating conventional sensors into a WAREMA climatronic® system
  • Alternatives or additional components to the WAREMA climatronic® weather station
  • Up to 3 weather stations or Sensor Interfaces can be connected to one WAREMA climatronic® system
  • The following sensors can be connected to a Sensor Interface:
    • 4x photo
    • 1x global radiation
    • 1x dawn/dusk
    • 4x speed
    • 1x wind direction
    • 1x outside temperature
    • 1x precipitation
    • 1x relative humidity
    • 1 DCF77 radio module
  • Protection-relevant data, such as wind and precipitation, are read once per second
  • Brightness, dawn/dusk, the radio clock signal etc. are transmitted every 10 seconds
  • Sensor Interface is supplied and connected via the climabus

Product & accessories

ProductArticle number
WAREMA climatronic® Sensor Interface, AP
1002235
WAREMA climatronic® Sensor Interface REG
1002234
AccessoriesArticle number
Strain relief kit for AP housing1002236
Switching power supply 24 V DC / 2.5 A, AP1002648
Switching power supply 24 V DC / 2.5 A, REG1002647

Technical data

Operating voltage24 V DC
ActuationClimabus
Degree of protectionIP 30
Safety classIII
InstallationSurface-mounted (AP)
Rail-mounted (REG)
Dimensions210 x 180 x 60 mm (AP)
12 MW (REG)

     

Features

  • Tableau Interface for connecting additional switches and push buttons to a WAREMA climatronic® system
  • Connected switches/push buttons can be freely allocated to the channels, groups and scenes
  • Comfortable allocation via WAREMA climatronic® studio software
  • Tableau Interface Master provides 48 inputs
  • Extension by means of max. 4 Tableau Interface Slaves up to 144 inputs
  • The Tableau Interfaces are connected to one another using a dedicated slave bus (RS485)
  • Power is supplied to the Tableau Interface Master via a separate power supply unit
  • Power is supplied to the Tableau Interface Slave via a slave bus connection originating from the master

Product & accessories

ProductArticle number
WAREMA climatronic® Tableau Interface Master, AP
1002685
WAREMA climatronic® Tableau Interface Master, REG
1002684
WAREMA climatronic® Tableau Interface Slave, AP
1002687
WAREMA climatronic® Tableau Interface Slave, REG
1002686
Accessories
Article number
Strain relief kit for AP housing1002236
Switching power supply 24 V DC / 2.5 A, AP1002648
Switching power supply 24 V DC / 2.5 A, REG1002647

Technical data

Operating voltage24 V DC
ActuationClimabus
InputMaster: 48 x 24 V DC for channel or scene push buttons
Slave: 24 x 24 V DC for channel or scene push buttons
Degree of protectionIP 30
Safety classIII
InstallationSurface-mounted (AP)
Rail-mounted (REG)
DimensionsMaster: 210 x 180 x 60 mm (AP)
Master: 12 MW (REG)
Slave: 106 x 180 x 60 mm (AP)
Slave: 6 MW (REG)

     

Documents & Downloads

Description Valid from Forwarding
WAREMA climatronic Sensor Interface 07.2018 Send document linkSend document link
WAREMA climatronic Tableau Interface 07.2009 Send document linkSend document link

Find your right specialist dealer in your country.
Competent consulting and expertise in sunshading.