SPECIALIST DEALER
SEARCH

Find your
WAREMA specialist dealer

Features

  • Motor control unit for central and local operation of up to two or four independently operated 230 V AC sun shading drives, e.g. on internal and external venetian blinds
  • Connection options:
    • 2 or 4 sun shading drives 230 V AC with or without incremental encoder
    • 2 or 4 conventional sunblind push buttons
    • 2 or 4 binary contacts
  • Functionality for each individual drive (excerpt):
    • Programmable status automation
    • Annual shading to accommodate shadows cast by surrounding buildings and other similar factors
    • 4 switchable slat tracking systems
    • Automatic adjustment of the slat angle depending on the elevation and azimuth angle of the sun for daylight utilisation
    • Shadow edge control for awnings
    • Cut-Off limit – To prevent overheating, manual operation can be limited to the range between "Cut-Off" (from slat tracking) and "Closed" in the case of cooling support
    • Time switch for move commands and automatic controls
    • Scenarios, e.g. for simple recall of complex room situations
    • Manual operation
    • Heating and cooling support that accounts for presence
    • Position feedback
    • Cause of movement
    • Parameterisable functionality with Control Edit
    • Central control
    • Undercurrent detection for identifying the motor limit position
  • Calculation of the current position of the sun shading product using incremental encoder inputs
  • Replaceable miniature fuses for line protection
  • Surface-mounted housing model for economical distributed installation, incl. strain relief


Product & accessories

ProductArticle number
LONMSE 2M230I AP1002739
LONMSE 2M230I REG1002735
LONMSE 4M230I AP1002740
LONMSE 4M230I REG1002736
AccessoriesArticle number
Strain relief kit for AP housing1002236
MABE 12
1002631

Technical data

Operating voltagetypically 100 - 230 V AC, 50 - 60 Hz
Degree of protectionIP 30
Safety classI
Outputs
Switching capacity per drive500 VA with 230 V AC / cos φ = 0.6

Inputs
local voltage, activemin. 21.6 V DC
typ. 24 V DC
max. 26.4 V DC
local voltage, inactivemin. –0.5 V DC
typ. 0 V DC
max. 4 V DC
LON interface
TransformerTP/FT-10
Connection typePlug terminal
Type of installationSurface-mounted (AP)
DIN rail-mounted (REG)
DimensionsLONMSE 2M230I:
158 x 180 x 60 mm (AP)
9 TE (REG)

LONMSE 4M230I:
210 x 180 x 60 mm (AP)
12 TE (REG)

     

Features

  • Actuator for central and local operation of up to two floating switching outputs for controlling conventional loop control systems.
  • Connection options:
    • 2 independent sun shading groups
    • 2 conventional sunblind push buttons
    • 2 binary contacts
  • Functionality for each individual drive (excerpt):
    • Annual shading to accommodate shadows cast by surrounding buildings and other similar factors
    • Slat tracking for slat product angle adjustment that follows the position of the sun
    • Time switch for move commands and automatic controls
    • Scenarios, e.g. for simple recall of complex room situations
    • Manual operation
    • Central control
  • Surface-mounted housing model for economical distributed installation, incl. strain relief

Product & accessories

ProductArticle number
LONMSE 2MPF AP1002741
LONMSE 2MPF REG1002737
AccessoriesArticle number
Strain relief kit for AP housing
1002236
MABE 121002631

Technical data

Operating voltagetypically 100 - 230 V AC
Degree of protectionIP 30
Safety classI
Outputs
Switching capacity per drive500 VA with 230 V AC / cos φ = 0.6
Operating current with 230 V ACmax. 2.15 A
DC voltage via relayMax. 30 V DC
Current capacity DCmax. 3 A
Inputs
local voltage, activemin. 21.6 V DC
typ. 24 V DC
max. 26.4 V DC
local voltage, inactivemin. –0.5 V DC
typ. 0 V DC
max. 4 V DC
LON interface
TransformerTP/FT-10
Connection typePlug-in terminals
Type of installationSurface-mounted (AP)
Rail-mounted (REG)
DimensionLONMSE 2MPF:
158 x 180 x 60 mm (AP)
9 MW (REG)

     

Features

  • Actuator for central and local operation of up to six independently operated 230 V sun shading drives or up to four independently switchable power consumers
  • Connectable power consumers
    • 6 sun shading drives 230 V AC in 4 groups or
    • 4 sun shading drives 230 V AC and 4 lamps 230 V AC
    • 4 conventional sunblind push buttons
    • 4 conventional light push buttons, window contacts
  • Functionality for each Controller in the control software (excerpt):
    • Annual shading to accommodate shadows cast by surrounding buildings and other similar factors
    • 4 switchable slat tracking systems
    • Automatic control of the slat angle depending on the elevation and azimuth angle of the sun for daylight utilisation
    • Time switch for move commands and automatic controls
    • Manual operation
    • Heating and cooling support that accounts for presence
    • Parameterisable functionality with Control Edit
    • Central control
    • Scenarios, e.g. for simple recall of complex room situations
  • Replaceable miniature fuses for line protection
  • Surface-mounted housing model for economical distributed installation, incl. strain relief

Product & accessories

ProductArticle number
LONMSE 6M230 AP1002744
LONMSE 6M230 REG1002611
AccessoriesArticle number
Manual control panel MABE 121002631
Strain relief kit for AP housing1002236

Technical data

Operating voltagetypically 230 V AC
Degree of protectionIP 30
Safety classI
Outputs
Switching capacity per drive500 VA with 230 V AC / cos φ = 0.6
Total power1) of light (outputs A1.1... A1.4)

230 V AC halogen floodlight 2 kW
230 V AC bulbs 2 kW (max.
500 W per output)
Fluorescent lamps 162 μF, 1.5 kVA
Inputs
local voltage, activemin. 8 V DC
typ. 24 V DC
max. 36 V DC
local voltage, inactivemin. –0.5 V DC
typ. 0 V DC
max. 3 V DC
LON interface
TransformerTP/FT-10
Connection typePlug-in terminals
Type of installationSurface-mounted (AP)
Rail-mounted (REG)
Dimensions210 x 180 x 60 mm (AP)
12 MW (REG)
1) When controlling lamps, the miniature fuse F1 / 6.3 AT can be replaced by a fuse with the value 10 AT.

     

Features

  • Actuator for central and local operation of up to twelve 230 V AC SMI sun shading products in up to six groups
  • Three SMI interfaces each with four 230 V AC SMI sun shading drives can be connected <</li>
  • Each SMI interface has separate fuse protection
  • 6 conventional sunblind push buttons can be connected <</li>
  • Functionality for each individual drive (excerpt):
    • Annual shading to accommodate shadows cast by surrounding buildings and other similar factors
    • 4 switchable slat tracking systems
    • Automatic control of the slat angle depending on the elevation and azimuth angle of the sun for daylight utilisation
    • Time switch for move commands and automatic controls
    • manual operationCentral control
    • Scenarios, e.g. for simple recall of complex room situations
    • Slow tilt and smooth start-up
    • Heating and cooling support that accounts for presence
    • Parameterisable functionality with Control Edit
    • Precise positioning and tilting
  • Surface-mounted housing model for economical distributed installation, incl. strain relief

Product & accessories

ProductArticle number
LONMSE 12M230 SMI AP1002745
LONMSE 12M230 SMI REG1002609
AccessoriesArticle number
Strain relief kit for AP housing1002236
SMI distributor, AP2011711
SMI distributor, REG2011710

Technical data

Operating voltagetypically 230 V AC
Degree of protectionIP 30
Safety classII
Output
Power per SMI interface900 VA
Inputs
Local voltage activemin. 8 V DC
typ. 24 V DC
max. 36 V DC
Local voltage inactivemin. –0.5 V DC
typ. 0 V DC
max. 3 V DC
LON interface
TransformerTP/FT-10
Connection typePlug-in terminals
Type of installationSurface-mounted (AP)
DIN rail-mounted (REG
Dimensions210 x 60 x 180 mm (AP)
12 MW (REG)

     

Find a qualified
advisor in your area now

  • Individual consultations
  • Comprehensive product selection
  • Inspirations for your project